ALL MTN / ENDURO

168mm

170mm

We are currently booking out our first production run of NEW Wardens. The first 50 orders will receive bonus limited edition Knolly merchandise. INFO

 
 

NEXT LEVEL

The new Warden LT is designed for all the riders that push the limit of what can be done on a trail bike and still want more. An absolute crusher of a bike that will have you searching for the highest climbs so that you can slay the downs. Confident, stable and very willing - the Warden LT will take your riding to the next level. 

 

GEOMETRY

 

SPECS

+Rear Travel: 168mm

+Wheel Size & Max Width: 27.5" x 2.8"

+Dropout/Hub Spec: 157 x 12mm axle, DT rear QR, axle 205.3 / 176.3 long, 1.0 thread pitch.axle included. All dimension here

+Headset: 44mm upper & 56mm lower

+Seatpost Diameter: 31.6mm

+Post Collar: Size 35.0mm

+Seatpost insertion depth: 280+mm

+170/175mm dropper post will fit most riders

+Can be run with a 200mm dropper post

+6066 series hydroformed alloy frameset

+Low stress pivot locations rotate on new long lasting premium BLACK IGUS bushings

For crank information check HERE.

+Internal cable routing with Di2 battery compartment

+Industry leading geometry - Long reach, Low bb height and standover

+Upper Chain Guide mount: E-type direct mount

+Chainguide Tabs: ISCG05 (removable)

+BB Shell Spec: 73mm / threaded

+Chainline: 55-57 with 56.5mm optimal

+Rear Brake Tabs: Post mount 160mm

+Two geometry settings allow you to fine-tune your ride experience

+Bottle mounts will fit a bottle even with  a reservoir shock 

 
4x4-graphic.png

Only Knolly Fourby4 suspension can achieve balance in all four of these categories with no compromise. We can build the bike to deliver the exact ride experience desired which means our bikes are some the best performance full suspension bikes on the market.

BRAKING. PEDALING. TRACTION. CONTROL.

SUSPENSION PERFORMANCE IS FOCUSED ON THESE FOUR CHARACTERISTICS.

The rear triangle pivots determine the rear wheel axle path and the anti brake jack characteristics of the frame.  The chainstay pivot placement means the brakes do not lock up the suspension.

The linkage pivots are isolated from the rear wheel axle path and they are directly responsible for the progressive nature of the rear suspension. For more tech nerdy info on our Fourby4 check out our suspension page.

Warden LT shock fitment specifications

Shock size: 205 x 62.5 / Optimal sag: 30% / Reducer & hardware spec: M10 Trunnion mount top x M8x25mm Bottom, 

 

KEY FEATURES

Fourby4 Suspension
Yes, you see an extra linkage here. This is the secret sauce in the Fourby4 design. It allows us to decouple the performance aspects of the rear suspension, which means we can fine-tune each bike to match its intended purpose. Put simply - the lower linkage controls the rear wheel axle path, and the upper linkage controls the shock progression.
OSD Seat Tube
One of the great benefits of the Fourby4 system is that it allows our frames to have full length, straight seat tubes. That means whatever your rider height/seatpost length combination is - it will work on a Knolly. Our frames can handle a 150mm dropper (small) all the way up to a 200mm (large & Xlarge).
157TRAIL Rear Hub
At Knolly our design philosophy demands that any performance feature change needs to be supported by a valid engineering position and proven rider performance benefits. 157TRAIL allows us to increase tire size compatibility, makes the rear triangle stiffer and keeps our chainstays short.
Threaded BB
We use threaded BB’s on all our frames. Why? Well, because they don’t suck. We are all riders and we have all spent time on press fit BB’s and from our experience threaded is the only way to go. The interface between the BB and frame is serviceable, there is less chance of frame damage and threaded BB's will not creak when installed properly.
Angular Contact Bearings
Our main pivots rotate on exceptionally high quality, dual row angular contact bearings, which are fastened with our custom oversized CNC’d axles. This combination results in superior lateral rigidity and high load carrying capability.  But what it really means is you spend more time riding your bike and less time fixing it.
Titanium Pivots
We designed our own custom titanium pivot hardware because off-the-shelf options were not up to our standards. This hardware acts as a fastener, axle and bearing cover. These are CNC machined from bar-stock black titanium. There are cheaper and easier ways to design a pivot, but they do not fit with our no compromise philosophy.
Show More
RFlett_Knolly_Warden_Images_July2019_WEB

Ride Quality

The way a bike is designed and manufactured has a huge impact on how it rides. Find out how we achieve the highest standards in ride quality. MORE

RFlett_Knolly_Warden_Images_July2019_WEB

Ride Experience

We make our bikes to take riders on a journey, to connect with the trail and create lasting moments that survive long after the sweat and dirt is washed away. MORE

Ride Engineering

Knolly was born from an engineer's mind, and from the start it has been in our DNA to develop industry leading product by design. MORE

© Knolly Bikes. 604-324-6635. Burnaby BC, Canada

 

  • Facebook Social Icon
  • Vimeo Social Icon
  • Twitter Social Icon
  • Instagram - White Circle